14
15" G-WIN Vehicle Mount Display User Manual
Connecting to Power Source
1. Connect the AC adapter to the 3 pin terminal block located on the back side of the Display.
2. Connect the power cord to AC adapter.
3. Plug the power cord in to the AC outlet and the device will turn on automatically.
2.4 Connecting Peripherals
The panel control port is designed for monitors that work with a variety of compatible video
sources. Due to the possible deviations between these signal sources, you may have to make
adjustments to the monitor settings from the OSD menu when switching between these sources.
Note:
Notice that standard input terminals include VGA. Your device may be equipped
with DVI-D, S-Video or Composite input terminals based on your order.
2.4.1 VGA Connector
Plug 15-pin VGA signal cable to the VGA connector, and plug the other end to the monitor.
Secure cable connectors with hexagonal copper pillars M3x4mm.
Pin assignment and signal names of VGA connector
Pin №
Signal Name
Pin №
Signal Name
1
RED
2
GREEN
3
BLUE
4
NC
5
GND
6
AGND
7
AGND
8
AGND
9
VGA_DE
10
GND
11
NC
12
DDCSDA
13
H Sync
14
V Sync
15
DDCSCL
