Winmate R15IH3S-SPC369, Руководство пользователя

Страница: 27 / 92

User Manual Chapter 2 Getting Started
- 27 -
2.3 Turning On and Off
The unit is configured to Power ON when is connected to the power source
(refer to
Ch.2, “Powering On”
section of this user manual for more details on how
to power on the HMI device).
You can Turn OFF the Panel PC with the Windows power settings.
To shut down the device:
1. Tap Start > Shut down .
2. Wait for your Panel PC to completely turn off before disconnecting the power
cord (if necessary).
2.4 Cleaning the Monitor
NOTE:
The IP69K Stainless Panel PCs withstand regular intense cleaning
and could hold up against steam and high-pressure water. The
devices are able to sustain water temperatures up to 80°C and a
water jet operating at 99.97 bar.
Before cleaning:

Make sure the device is turned off.

Disconnect the power cable from any AC outlet.
When cleaning:

Use water up to 80°C to clean the housing.

Wipe the screen with a clean, soft, lint-free cloth. This removes dust and
other particles.

The display area is highly prone to scratching. Do not use ketene type
material (ex. Acetone), Ethyl alcohol, toluene, ethyl acid or Methyl chloride
to clear the panel. It may permanently damage the panel and void the
warranty.

If it is still not clean enough, apply a small amount of non-ammonia, non-
alcohol based glass cleaner onto a clean, soft, lint-free cloth, and wipe the
screen.

Don not use oil directly on the display screen. If droplets are allowed to
drop on the screen, permanent staining or discoloration may occur.