USER MANUAL
CHAPTER 2
INSTALLATION
- 22 -
2.4 Connecting Peripherals
The panel control port is designed for monitors that work with a variety of
compatible video sources. Due to the possible deviations between these signal
sources, you may have to make adjustments to the monitor settings from the
OSD menu when switching between these sources.
NOTE:
Notice that standard input terminals include VGA and HDMI. Your
device may be equipped with DVI-D, S-Video or Composite input
terminals based on your order.
2.4.1 VGA Connector
Panel Mount Display uses standard 15pin D-sub connector. Plug 15-pin VGA
signal cable to the VGA connector in the rear of motherboard, and plug the other
end to the monitor. Secure cable connectors with hexagonal copper pillars
M3x4mm.
Pin Assignment and signal names for VGA connector
Pin №
Signal Name
Pin №
Signal
Name
1
RED
2
GREEN
3
BLUE
4
NC
5
GND
6
AGND
7
AGND
8
AGND
9
+5V
10
GND
11
NC
12
DDCSDA
13
H Sync
14
V Sync
15
DDCSCL
