Winmate IBMH100, Руководство пользователя

Страница: 7 / 56

USER MANUAL PREFACE
- 7 -
Safety Precautions
WARNING!
Always completely disconnect the power from OPS module whenever
you work with the hardware. Do not make connections while the
power is on. Sensitive electronic components can be damaged by
sudden power surges.
CAUTION
Always ground yourself to remove any static charge before touching
the CPU card. Modern electronic devices are very sensitive to static
electric charges. As a safety precaution, use a grounding wrist strap at
all times. Place all electronic components in a static-dissipative surface
or static-shielded bag when they are not in the chassis.
Safety and Warranty
1. Please read these safety instructions carefully. and keep this user manual for later
reference.
2.
Please disconnect this equipment from any AC outlet before cleaning. Do not use
liquid or spray detergents for cleaning. Use a damp cloth.
3. For pluggable equipment, the power outlet must be installed near the equipment
and must be easily accessible.
4. Put this equipment on a reliable surface during installation. Dropping it or letting it
fall could cause damage.
5. Make sure the voltage of the power source is correct before connecting the
equipment to the power outlet.
6. Position the power cord so that people cannot step on it. Do not place anything
over the power cord.
7. If the equipment is not used for a long time, disconnect it from the power source to
avoid damage by transient over-voltage.
8. If any of the following situations arises, get the equipment checked by service
personnel:
A. The power cord or plug is damaged.
B. Liquid has penetrated into the equipment.
C. The equipment has been exposed to moisture.
D. The equipment does not work well, or you cannot get it to work according to
the user’s manual.
E. The equipment has been dropped and damaged.
F. The equipment has obvious signs of breakage