Winmate EAC PRO-IK90, Быстрый старт, Страница: 17 / 30

11
Backplane Board Connectors
Fan Connector (FAN2)
Smart fan is connected to FAN2 by default. Sensor chip is located on the BP1
board.
Sensor Chip Behavior:
Connector Description
FAN1 Always turn on
FAN2 Smart fan: when sensor cheap reaches the temperature of
75 degrees, smart fan turns on.
When sensor cheap reaches the temperature of 65 degree,
smart fan turns off.
You can check Smart Fan settings in BIOS. Go to Advanced > PC Health
Status
DC Out 12V Connector (J9)
Use this DC Out 12V connector to connect power when you install PCI/ PCIe card.
Pin №
Signal Name
1 GND
2 +12VS
3 Sense Pin
Pin №
Signal Name
Pin №
Signal Name
1 GND 2 INT_+12VS
3 GND 4 INT_+12VS