Winmate EAC PRO-IK90, Быстрый старт, Страница: 12 / 30

6
PCI/ PCIe Card Installation
DO NOT Connect any external power to PCI/ PCIe
card. Use only DC Out 12V connector (J9) on Backplane
Board.
PCI/ PCIe Card Dimensions, mm
IMPORTANT:
Before recovery, remove the PCI/ PCIe card.
When installing PCIe
card, you need to
change
JP1 jumper
settings located on
the Backplane
Board.
1. Loosen two thumbscrews on the front panel by hand and remove the top cover.
2. Insert the PCI/ PCIe card into the PCI/ PCIe slot.
3. Replace top cover and secure two thumbscrews.
To Enhance Vibration and Shock Resistance Use Cable Ties to Fix the PCI/ PCIe Card
1. Loosen six screws on the right side
cover.
2. Loosen a thumbscrew to open the top
cover.
3. Insert PCI/ PCIe card.
4. Use the cable tie (included in the
package) to secure the PCI/ PCIe card.
5. Reassemble the right side and top
cover.