Winmate EAC Mini EACIL67, Руководство пользователя

Страница: 18 / 72

18
EAC Mini EACIL67 IoT Gateway User Manual
2.2 Hardware Installation
This chapter describes how to install optional expansion module in the system.
Caution
Always remove the power cord before installing the hardware.
2.2.1 mSATA Installation
To insert mSATA:
1. Unscrew the four screws on the bottom cover.
2. Plug in mSATA card with into the mPCIe slot.
3. Screw the two screws on board to fix mSATA.
4. Screw back the bottom cover.
2.2.2 External Antenna Installation
Notice that external antenna is an optional feature of the EAC Mini EACIL67. If you order EAC Mini
EACIL67 with Wi-Fi, SMA antenna comes pre-installed.
To install external SMA antenna:
1. Remove the rubber cap on the SMA connector before installing the antenna.
2. Align the antenna with the SMA connector located on the rear side of the EAC Mini and fasten it as
shown on the picture.
3. Adjust the position of external antenna for better signal.