Winmate A831, Руководство пользователя

Страница: 17 / 72

Chapter 2 Installations
2.1 Memory Module
（
SODIMM
）
Installation
The A831 SBC provides one 200-pin SODIMM slot. The socket supports up to 1GB
DDR 400 SDRAM. When installing the Memory device, please follow the steps
below
：
Step.1. Firmly insert the SODIMM at an angle into its slot. Align the SODIMM on the
slot such that the notch on the SODIMM matches the break on the slot.
Step.2. Press downwards on SODIMM until the retaining clips at both ends fully snap
back in place and the SODIMM is properly seated.
¾
Caution
!
The SODIMM only fits in one correct orientation. It will cause
permanent damage to the development board and the SODIMM if
the SODIMM is forced into the slot at the incorrect orientation.
A831 SBC User Manual
7