7
In this installation
example the FT 4
adapters must be
used.
Put the
positioning plugs into the screw holes that
are not used. The parts are screwed into
the two screw positions directed towards
the external side.
Installation example 4: wooden profile with
smooth rebate
If the wireless contacts are used in wooden
profiles, no adapters are needed. All you
need to do is place the contact flushly at the
front side. Screwing is made through the
two screw positions directed towards the
outside.
Step 5: Installing the wireless contact
Place the contact surface of the wireless
contact at the marking level and fix the
contact. Do not fix the screws too tightly in
order to avoid damage to the plastic
housing.
Close the window sash carefully to verify
whether the magnet or other components
collide with the wireless contact. Should the
components collide, the window must be
adjusted or the mounting position changed.
(Refer to the maintenance and adjustment
instructions of your fittings manufacturer.)
Step 6: Functional test
After the installation we recommend you to
perform a functions test. Open the window
and verify whether the smart home system
or the subsequent component responds to
the opening of the window. If there is no
response, use the Section 8
(possible
sources of error)
of these instructions to
solve the problem.
After the successful functions test, place
the screw hole covers onto the screw holes
not used.
