6
Step 2: Installing the magnet
As soon as you have found an appropriate
installation place, you can proceed with the
installation of the magnet.
Loosen the selected screw position. Attach
the radio contact to the screw hole and fix
the screw position through the screw hole
of the magnet. (see picture).
Step 3: Determine radio contact position
In order to enable precise positioning of the
wireless contact, it may be best to close the
window slowly and to apply a mark at the
height of the mounted magnet. (Please take
care that the temporary marking can be
completely removed afterwards.)
Step 4: Choose plastic adapter
Select the suitable profile adaptions for the
radio contact. The following pictures show
current profile and installation examples:
Installation example 1: PVC-U window with
a small groove in the frame
In this installation
example the FT 1
adapter must be
used. Put the
component into the small position holes on
the back of the radio contact. It is screwed
into the two screw positions located
towards the inner side.
Installation example 2: PVC-U window with
a wide groove in the frame
In this installation
example the FT 5
adapters must be
used. Put the
positioning plugs into the screw holes that
are not used. The parts are screwed into
the two screw positions located towards the
inner side.
Installation example 3: PVC-U windows
with wide ridge at the front of the frame
