SH-6580-4(108D) User Guide
SH-6580 User Guide
Hot-key commands
UL
as Upper Left,
UR
as Upper Right,
LL
as Lower Left,
LR
as Lower Right.
MI
as MIddle,
Hot-key command is a short keyboard sequence to select a computer,
to activate computer scan, etc. KVM Switches interprets keystrokes
for hot-keys all the time. A hot-key sequence starts with two left
<CTRL> keystrokes followed by one or two more keystrokes. A
built-in buzzer generates a high-pitch beep for correct hot-key
command; otherwise, one low-pitch beep for error and the bad key
sequence will not be forwarded to the selected computer.
ESC: To exit the OSD, press the <ESCAPE> key.
DISPLAY OSD(On-Screen-Display) Operation
There are five push buttons “AUTO”, “MENU”, “
+
”, ”
-
“, “LCD-I/0” and
one “POWER” LED on the keyboard. When the control center is
power on, the LED is bright. When the display is power on, the LED
is green. When the display is power off, the LED is red. If you want to
adjust the display, first press “MENU” button. Use “+” or “-“ selecting
which function you want. Then press “MENU” to work out.
The short form hot-key menu can be turned on as an OSD function
(<F4>:more\Hotkey Menu) every time the left <CTRL> key is pressed
twice.
L-CTRL
: is the <CTRL> key located at the left side of the
keyboard.
1~8
: are the number keys '1' ~ '8' at the upper row of the
keyboard.
Do not use the keypad at the right of the
keyboard.
When you put down the display, the display is off after 3~5 Second.
Oppositely the display is on after 3~5 Second. If the display is on, it
will be off when you press the “LCD-I/0” after 3~5 Second. Oppositely
the display will be on 3~5 Second.
J
To select a computer by hot-key command, you must know its
channel address, which is determined by the KVM Switches
connection. For a computer connected to a
Master
, its address is
represented by the PC port label (1~8). For a computer
connected to a
Slave
, two characters represent its address. The
first character is the channel address of the
Master
unit (1~8) and
the second one is the channel address of the
Slave
(1~8).
Please note that only
Master's
'PC 1' ~'PC 8' ports can be
connected to a
Slave
.
Left
Ctrl
+ left
Ctrl
+
7
Selects a computer connected to port 7 of the
Master
.
Left
Ctrl
+ left
Ctrl
+
6
+
7
Selects a computer connected to port 7 of a
Slave
connected
to port 6 of the
Master
.
J
To start
Auto Scan
, automatically scan power-on computers one
by one at a fixed interval:
16
When
Auto Scan
detects any keyboard or mouse activity, it
suspends the scanning till activity stops; it then resumes with the
left
Ctrl
+ left
Ctrl
+
F 1
15
