Winget CUMFLOW RP100XD MK2, Инструкция по эксплуатации и частям

Страница: 31 / 77

MAINTENANCE AND LUBRICATION
NOTE:
ALWAYS ENSURE APPARATUS IS ISOLATED FROM MAINS SUPPLY BEFORE
COMMENCING MAINTENANCE. IF NECESSARY A ‘PERMIT TO WORK’ SHOULD BE
OBTAINED
DAILY:
Charge the grease points using Total EP2 Grease 2 (or equivalent)
WEEKLY
Lubricate
Racks Apply Open Gear Lubricant (or equivalent)
Pinions Apply Open Gear Lubricant ( or equivalent)
Inspect and top-up if necessary.
1. Star Gear Box (Brown Group BH302) Use Total Carter SP220 1.2 litres cap
2. Pan Drive Gear Box (Brown Group BH202) Use Total Carter SP220 0.80 litres cap
NOTE:- Total Carter SP220 is a synthetic oil and should not be mixed with mineral oils
such as Mobil Mobilgear 630, unless the gearbox is thoroughly flushed out after draining.
INSPECT AND ADJUST-MONTHLY
1. Pan Gear and Pinion, grease Open Gear Lubricant (or equivalent), as required.
2. Adjust Star Blades, Fixed Blades and Discharge Blade to the following settings, also
make sure that Blade Fingers are free in their bearings and that the springs are clear of
obstruction.
3. Star Drive Bevel Pinions, remove cover and grease pinions with Open Gear Lubricant
or equivalent as required. Check retaining grub screws and keys are tight.
MIXING BLADE 3mm clear of pan base. Adjust by moving the blade up or down its
finger.