WinGD WARTSILA RT-flex58T-E, Руководство по обслуживанию

Страница: 426 / 504

Maintenance
9223 − 1/A1
RT-flex58T-E
Winterthur Gas & Diesel Ltd.
4/ 22
3.2 Fitting the toothed belt
Only the new belt version (black colour) must be installed.
E
⇒ Connect gear wheels 19 and 18 with toothed belt 9, paying attention to their
marks ’MK’ which must coincide according to Fig. ’G’ (zero position).
⇒ Push shaft encoder outwards until the toothed belt is lightly tensioned and
meshing properly with the gear wheels. Lightly tighten screws 15. Recheck
marks ’MK’.
⇒ Fit screws 15a, washers 16 and locking plates 17. Apply MOLYKOTE paste G
to the threads and head seatings.
⇒ Align toothed belt exactly in running direction.
⇒ Attach spring balance 59 to the shaft encoder and slightly preload it according
to Fig. ’F’.
⇒ Loosen all screws 15 and 15a, paying attention that the shaft encoder can still
move freely.
⇒
Tension toothed belt with 30 N indicated on spring balance, and fixate shaft
encoder with screws 15 and 15a.
Remark: Pull the spring balance exactly in tensioning direction, keeping the fric-
tion between the holder guide and screw surfaces as small as possible.
008.730/00 008.729/00
15a 9
F
MK
13a
59
17
I
I
15
SK
15a
58
16
2013
Crank Angle Sensor Unit: Dismantling, Assembling and Adjusting