G
UIDE D
'
INSTALLATION ET D
’
UTILISATION
2.
EQUIPMENT
The air conditioner is composed of 2 separate units, of a thermostat and a wiring box.
connected by frigorific ducting pipes and
distance between both units should not exceed
2.1.
Outside unit
The unit must be installed outside or in a room.
If the unit is installed outside:
-
Place the unit in order the air suction and
-
Encourage the installation in open areas and sheltered from the sun
-
Be cautious to the noise to the neighborhood
-
Raise the unit to prevent from
If the unit is installed in a room :
-
Place the unit in order the air suction and air rejection are not disturbed
-
Ensure there is a good ventilation
-
Maximum temperature and non permanent
-
Ideal temperature ≈ 20°C.
2.2.
Inside unit
The inside unit is designed to be installed with a duct system. It has to be placed inside the
2.3.
Thermostat
The thermostat can be installed either inside or outside the
The probe must always be placed in the air conditioned room. The supplied sensor has a length of 1,5m.
It can be extended using insulated flexible cable with 2 conductors of 0.5mm² minimum section.
2.4.
Wiring boxt
The connection box can be installed too
into consideration the cable length ( 2 m)
2.5.
Connection drawing
TAKE INTO CONSIDERAT
OUTSIDE UNIT
CABLE LENGTH E 5 or 9M
UTILISATION
WINESP40DU4
/
WINESP40DU8
The air conditioner is composed of 2 separate units, of a thermostat and a wiring box.
connected by frigorific ducting pipes and electric connections t of 4 or 8m depending the model
distance between both units should not exceed 4 or 8m.
The unit must be installed outside or in a room.
Place the unit in order the air suction and air rejection are not disturbed
Encourage the installation in open areas and sheltered from the sun
Be cautious to the noise to the neighborhood
from accumulation of water and snow
unit in order the air suction and air rejection are not disturbed
Ensure there is a good ventilation
and non permanent≤ 40°C
The inside unit is designed to be installed with a duct system. It has to be placed inside the
The thermostat can be installed either inside or outside the air conditioned room
The probe must always be placed in the air conditioned room. The supplied sensor has a length of 1,5m.
It can be extended using insulated flexible cable with 2 conductors of 0.5mm² minimum section.
The connection box can be installed too either inside or outside the wine cabinet.
into consideration the cable length ( 2 m)
TAKE INTO CONSIDERATION THE CABLE LENGTHS BETWEEN THE
CONNECTION BOX AND THE UNITS .
CABLE LENGTH
THERMOSTAT
CABLE LENGTH 2M
MAIN CONNECTION
NO CABLE SUPPLIED
Page 6
The air conditioner is composed of 2 separate units, of a thermostat and a wiring box. They must be
depending the model. The
The inside unit is designed to be installed with a duct system. It has to be placed inside the house.
conditioned room.
The probe must always be placed in the air conditioned room. The supplied sensor has a length of 1,5m.
It can be extended using insulated flexible cable with 2 conductors of 0.5mm² minimum section.
.
either inside or outside the wine cabinet. If installed outside, take
S BETWEEN THE
INSIDE UNIT
CABLE LENGTH 2M