SPECIFICATIONS
Antenna Type: Amplified
Range: Up to 35 miles*
Type: VHF and UHF channels
For Outdoor use Only
Omnidirectional
VHF/UHF/FM Antenna
Unit Weight: 2.11 lbs.
Antenna Head Diameter: 14.9”
Height of Antenna: 7.25”
Power required: +12VDC at 85mA
*Antenna reception may vary depending on the
height of the transmitting tower, lobe pattern of the
transmitter, height of the receiving antenna, weather
conditions, and any obstructions to the signal path.
INCLUDED COMPONENTS
Antenna Head
Circular Gasket
Attachment
Tube
O-ring
Wall Plate/Power Supply
Hexagonal Nut
Pedestal Top and Bottom
Star Washer
Surface Mount Box
Twist On F-Connector (4)
5’ Power Coaxial Cable
Insulated Terminal (2)
30’ RG-59 Coaxial Cable
#6x3/4” Screw (2)
#6x1/2”
Screw
(2)
REPLACEMENT PARTS
Replacement head available by separate order.
Replacement power supply available by separate order.
2
30’ RG-59 Coaxial
cable
5’ Power cable
Surface mount box
Wall plate/power supply
Twist-on
F-Connector
(4)
Insulated
Terminal (2)
#6 x ¾”
Screw (2)
#6 x ½”
Screw (2)
ANTENNA PARTS BREAKDOWN
Antenna head
Attachment tube
Pedestal top
Pedestal bottom
Hexagonal nut
O-ring
Pedestal assembly
Circular gasket
Star washer
Do not install this system in rainy or wet
conditions. DO NOT PAINT this antenna.
Painting antenna will void antenna warranty.
STEP 1. Strip off about 1/2” of the cable jacket.
STEP 2. Trim braid close to outer cover and
remove 1/4”* of inner insulation
being careful not
to nick center conductor
. Make sure no foil or
braid can touch center conductor.
STEP 3. Screw F-Connector onto cable end until
center conductor extends about 1/8” past the end
of the connector.
If installing in very hot weather, increase these
dimensions 1/8”.
FOR YOUR SAFETY
INSTALLING SCREW-TYPE CONNECTORS