WINEGARD COMPANY
POWER ON
Enter User Menu?
*Yes No
Search Mode*
Diagnostics
Multi-Sat Mode*
Manual 61
Manual ##
Selected
Power OFF?
*Yes No
3. The user menu consists of
four choices: Search Mode,
Diagnostics, Installation, and Exit.
Press the Enter button to choose
Search Mode.
1. Press and hold “POWER” for two
seconds or until the TRAV’LER
interface displays “POWER ON.”
Then, press and hold “ENTER for
two seconds.
2. The interface will ask if you wish
to enter the user menu. Press the
Select button to choose “Yes,”
and then press the Enter button to
confirm the selection.
Manual Operation
The TRAV’LER antenna is a versatile satellite antenna and can be manually set to find many different satellites individually.
This function is rarely used. The instructions assume that the antenna is already in the stowed position. Note: Diagnostics
and Installation menus are not required for normal operation and should only be entered by a trained professional.
Connecting the Shaw Direct Receiver
1. Connect your Shaw Direct receiver to the TV using the appropriate audio and video cables. (Refer to your television
user manual for the best audio/video connections).
2. If you have not chosen a programming package for your Shaw Direct system or added this receiver to your existing
Shaw Direct account, please call 1-888-554-7827 prior to using your Shaw Direct receiver for the first
time.
3. Ensure that your Shaw Direct receiver is connected to power.
4. Locate the coaxial feed coming from the TRAV’LER system.
5. Connect the satellite feed to the coaxial input labeled with the symbol of a satellite dish.
6. Power on the Shaw Direct receiver and television. If your TRAV’LER system is properly tuned and receiving signal,
the satellite dish icon on the front of the Shaw Direct receiver will be highlighted in green.
If the TRAV’LER system is stowed or not tuned to the Shaw Direct satellites, the satellite icon on the front of the Shaw
Direct receiver will appear in red. Turn on the TRAV’LER unit or troubleshoot as needed to reachieve positive signal.
If your Shaw Direct system is disconnected from power for an extended period of time or has been recently moved
from another location, you may need to have your Shaw Direct system reauthorized. This can be determined when
you receive a green (positive) signal but cannot receive video on a subscribed channel.
6. The interface will ask if you want
to turn the power off. Press the
Enter button to choose “No” and
start a new search for your chosen
satellite. Press “SELECT” then
“ENTER” to choose “Yes” and turn
off the antenna.
The TRAV’LER antenna will remain
in manual mode until you select
“Multi-Sat Mode” again.
4. In the Search menu, choose from
the following: Multi-Sat Mode
(normal search mode), Manual 111,
Manual 107, Main Menu (returns to
the user menu) or Exit (enters the
search routine).
Press the Select button to cycle
through satellites until the asterisk
is next to the satellite you wish to
find. Press “ENTER” to confirm the
selection.
5. The interface will ask you to
confirm the change. Press
“SELECT” to move the asterisk
to “Yes.” Then, press “ENTER” to
confirm the selection.
The TRAV’LER interface will
then acknowledge which satellite
has been selected. Press the
Enter button.
2
