Operation for Bell TV Users
3 Operation
4
6
5
8
10
9
7
3
2
1
14
16
18
15
12
13
11
Operation for Bell TV Users
Operation 4
17
Press and hold
[POWER]
for two
seconds or until the TRAV’LER interface
displays “POWER ON.”
Now that the power is on, release the
[POWER]
button.
The interface box will ask for a
password. Press
[ENTER]
four times to
enter code “0000” on the display.
The User Menu consists of four choices:
Search Mode, Diagnostics,
Installation
,
and Exit. Press
[SELECT]
until the
asterisk is next to “Installation,” and then
press
[ENTER]
.
Press
[SELECT]
until the asterisk is next
to “SM Mount,” and then press
[ENTER].
Press
[SELECT]
until the asterisk is next
to “SM ExpressVu.” Press
[ENTER].
Press
[SELECT]
until the asterisk is next
to “Yes.” Press
[ENTER]
.
Press
[ENTER]
to choose “Select Antenna.”
Enter code “0022” by pressing
[SELECT]
to increase each number. Press
[ENTER]
.
Press and hold the
[ENTER]
button for
two seconds. The TRAV’LER interface
will ask if you wish to enter the User
Menu. Press
[SELECT]
to choose “Yes.”
Then, press
[ENTER]
.
The antenna will peak on a signal.
Press
[ENTER]
and then choose
[SELECT]
until the asterisk is next to
“Installation.” Press
[ENTER]
.
Press
[SELECT]
until the asterisk is next
to “Exit.” Press
[ENTER]
.
The TRAV’LER interface box will try
to determine the type of dish that it is
working with. The TRAV’LER interface
will display the type of satellite dish on
the top line.
The TRAV’LER antenna will lock onto two
different satellites. As the antenna finishes
searching, the antenna will display an
asterisk for each satellite found.
The TRAV’LER interface box will ask if
you want to turn the power off. Select
“No” by pressing
[ENTER]
.
TIP
If you want to turn off the power to the TRAV’LER antenna after the antenna has locked onto satellites, press
[POWER]
and
[SELECT]
at the same time. Before traveling, make sure to press
[POWER]
and wait for the
TRAV’LER antenna to stow. See page 6 for more information on stowing before traveling.
The TRAV’LER interface box will display
“in progress” and then “Success”.
The TRAV’LER antenna will enter the search
mode as part of its normal operation.
WINEGARD COMPANY
POWER ON
connecting to
antenna
LG Mount
SM Mount*
SM ExpressVu*
Installation
Install Password
0000
Installation*
Exit
Select Antenna*
Raise Antenna
SM Password
0022
SM ExpressVu
*Yes No
Enter User Menu?
*Yes No
SM ExpressVu
Peaking...
Installation*
SM DTV Triple
Exit*
Select Antenna
SM ExpressVu
Success
SM ExpressVu
Ready: Multi-Sat
Power Off?
Yes *No
SM ExpressVu
Searching...
SM ExpressVu
*91 *82
