Winegard RC-1010, Руководство по установке

Страница: 16 / 36

16
Basic Operation
Basic operation of the RC-1010 receiver includes changing channels as well as using the Electronic
Program Guide, or EPG.
Select a Digital Channel
The digital channel number is different from the traditional NTSC channel number. Please follow the
indication below to select the digital channel if you prefer to use numeric key to do the channel selection.
Example: digital channel number: 10 - 2
1. press numeric key “1” and “0”
2. press the “
-
“ button
3.
press the numeric key “2”
Note: Entering channel “10” with the remote control will default to “10-1”.
To cycle through all available channels, press
CH+
▲
/CH-
▼
on your remote control. You may also
directly select a channel using the Electronic Program Guide.
Using the Electronic Program Guide (EPG)
The Electronic Program Guide is a listing of all channels currently scanned into your Digital Receiver, and
if available, a schedule and information about programming on each channel.
● Press the EPG button to display EPG window.
● The current program will be highlighted in yellow
automatically. A programming schedule can be
found in the upper right pane and information for
the current program can be found in the lower
right pane.
● Press
▲
or
▼
buttons to select a different channel
and press ENTER. Information for that channel
will be displayed.
● The EPG can display programming information for
a maximum of 12 hours from the current time.
● Press EXIT to leave the program guide.