10
Connect the coax cable from the roof to the
“Satellite In” connection on the receiver.
(A dual receiver upgrade kit is available. Contact
Winegard Company for more information.)
CONNECTING THE RECEIVER —
Installation • Wiring
INITIALIZING ---
1. Be sure vehicle is in a location free of all obstruc-
tions and with a clear view of the southern sky.
2. DO NOT MOVE VEHICLE during the first
initialization. Power up unit, turn on receiver. FOR
THE FIRST TIME ONLY, the unit may take up to
10 minutes to initially find the satellite signal. The
GPS is also initializing at this time. After the GPS
initializes, the unit will begin searching for the
correct satellite. See page 4 for detail of operation.
3.
If the GPS does not initialize at this time
, turn
off the unit. You may need to move the GPS
antenna to a different location on your roof. After
you move the GPS, DO NOT SECURE TO ROOF.
4.
TEST YOUR SYSTEM BEFORE SECURING
THE GPS ANTENNA.
Verify that the dish has
found the correct satellite by checking the
receiver’s signal meter screen.
5. After the correct satellite has been found,
secure
GPS antenna by removing adhesive backing
and securing to roof.
