background image

VHF/UHF MODEL 

HD7084P & HD7697P 

 

Winegard Company • 3000 Kirkwood Street • Burlington, IA 52601-2000

NOTE

To prevent damage in shipping, the second set of elements from the rear of the 

boom are folded to the reverse side. You can identify these elements by the tags 

attached to them. Follow the directions on the tags carefully.

WARNING

INSTALLATION OF THIS ANTENNA NEAR POWER LINES IS DANGEROUS. 

FOR YOUR SAFETY, FOLLOW THE INSTALLATION INSTRUCTIONS.

VHF/UHF

MODEL HD7697P

769 Series Antennas

Digital/High Definition

VHF/UHF

MODEL HD7084P

POINT

 THIS END 

TOW

ARDS ST

ATIONS

POINT

 THIS END 

TOW

ARDS ST

ATIONS

90 DAY LIMITED WARRANTY

  

Winegard Company warrants this Winegard product against any defects in materials or work-

manship within 90 (ninety) days from date of purchase. No warranty claim will be honored unless 

at the time the claim is made, you present proof of purchase to an authorized Winegard dealer (if 

unknown, please contact Winegard Company, 3000 Kirkwood Street, Burlington, IA 52601-2000, 

Telephone 800-288-8094).
  Winegard Company (at its option) will either repair or replace the defective product at no charge 

to you. This warranty covers parts, but does not cover any costs incurred in removal, shipping or 

reinstallation of the product. This limited warranty does not apply if the product is damaged, deterio-

rates, malfunctions or fails from: misuse, improper installation, abuse, neglect, accident, tampering, 

modification of the product as originally manufactured by Winegard, usage not in accordance with 

product instructions or acts of nature such as damage caused by wind, lightning, ice or corrosive 

environments such as salt spray and acid rain.
  The 90 Day Warranty is provided on the condition that the equipment is properly delivered with all 

handling and freight charges prepaid to your Winegard dealer for return to our factory for repair or 

replacement. Winegard dealers will arrange for the replacement or repair and return to you without 

charge the product which failed due to defective material or workmanship.
  WINEGARD COMPANY WILL NOT ASSUME ANY LIABILITIES FOR ANY OTHER WARRANTIES, 

EXPRESS OR IMPLIED, MADE BY ANY OTHER PERSON.
  ALL  OTHER  WARRANTIES  WHETHER  EXPRESS,  IMPLIED  OR  STATUTORY  INCLUDING 

WARRANTIES  OF  FITNESS  FOR A  PARTICULAR  PURPOSE AND  MERCHANTABILITY ARE 

LIMITED TO THE 90-DAY PERIOD OF THIS WARRANTY.
  The foregoing shall be the sole and exclusive remedy of any person, whether in contract, tort or 

otherwise, and Winegard shall not be liable for incidental or consequential damage or commercial 

loss, or from any other loss or damage except as set forth above.
  Some states do not allow limitations on how long an implied warranty lasts, or the exclusion of 

limitation of incidental or consequential damages, so the above limitations or exclusions may not 

apply to you.
  This warranty gives you specific legal rights and you may also have other rights which vary from 

state to state.

Printed in U.S.A.  © Winegard Company 2002 Rev3 12-13  1450291

Rev. 2/08

Fig. 10

HOW TO PROVIDE LIGHTNING 

PROTECTION FOR TV ANTENNA  

AND SET
Step 1. 

Mount the lightning arrestor 

or 75 ohm coaxial grounding block as 

close as possible to where the 75 ohm 

coaxial cable downlead enters the 

house. See Figure10.

Step 2. 

The ground wires for both 

the mast and the downlead should 

be copper or aluminum wire, number 

eight (8) or larger. See Figure 10.

Step 3. 

The downlead wire from 

the antenna to the lightning arrestor 

and the mast ground wire should be 

secured to the house with stand-off 

insulators, spaced from four (4) to six 

(6) feet apart. See Fig. 10.

NOTE:

 In the case of a “ground up” 

antenna installation, it may not be 

necessary to ground the mast if the 

mast extends four or more feet int the 

earth. Consult a TV serviceman for the 

proper depth in your location. 

Antenna Lead

In Wire

Ground

Clamp

Electric

Service

Equipment

Antenna

Discharge Unit

(NEC Section 810-20)

Power Service Grounding

Electrode System

(NEC Art 250, Part H)

Ground 

Clamps

Grounding Conductors

(NEC Section 810-21)

NEC - National Electrical Code

Example of antenna grounding as per

National Electrical Code, ANSI/NFPA 70

(May substitute a 75 ohm 

Coax Grounding Block)

Register your product at winegard.com/myantenna

Отзывы: