9 Guide for using DIRECTV SWM Technology with Winegard Mobile Satellite TV Antennas
Guide for using DIRECTV SWM Technology with Winegard Mobile Satellite TV Antennas 10
If connecting to a DVR receiver, do not connect a coax cable to the Satellite 2
input. With SWM, only connect to the Satellite 1 port (labeled FTM or SWM).
Terminate unused
splitter outputs
with a 75 ohm
termination cap.
If connecting to a DVR receiver, do not connect a coax cable to the Satellite 2
input. With SWM, only connect to the Satellite 1 port (labeled FTM or SWM).
Terminate unused
splitter outputs
with a 75 ohm
termination cap.
Wiring Version 2
All three ports of the SK-3003 TRAV’LER must be connected to
three inputs on the SWM8 as shown for access to 101° odd and
even transponders, 101° and 119° even transponders
programming.
Odd (13V) transponders will not
be available in wiring version 2.
This will be verified in the
receiver installation status
screen shown here.
Wiring Version 1
All three ports of the SK-3003 TRAV’LER must be connected to
three inputs on the SWM8 as shown for access to 101° odd and
even transponders, 119° odd transponder only programming.
Even (18V) transponders will not
be available in wiring version 1.
This will be verified in the
receiver installation status
screen shown here.
≤40 ft between
antenna
&
SWM8
Wiring Diagram for Winegard SK-3003 TRAV’LER Antenna with DIRECTV SWM8
Non-DVR Receiver
DVR Receiver
KEY
Coax Cable
Power Cable
(attached to
power inserter)
≤40 ft between
antenna
&
SWM8
Wiring Diagram for Winegard SK-3003 TRAV’LER Antenna with DIRECTV SWM8
Non-DVR Receiver
DVR Receiver
KEY
Coax Cable
Power Cable
(attached to
power inserter)
Terminate
unused SWM
outputs with
a 75 ohm
termination cap.
Terminate unused
SWM outputs
with a 75 ohm
termination cap.
