Assembly GUIDE
or visit
wineracksamerica.com
Questions?
888.373.6057
Standard Tasting Table
Page 4
6. Attaching your rack to the wall (optional). Depending on how many bottles you store, your wine cellar rack
could weigh as much as 540 lbs. To avoid tipping, attach your rack to the wall using one of the following
methods.
1. Put the rack in the desired location.
2. Shim the front of the rack so it is
parallel with the wall behind it.
3. Locate a wall stud behind the rack.
4. Drive a 2 1/2" wood screw through a
back spacer bar to attach to the stud.
1. Use "L" brackets (located at any hardware store).
2. Attach to both the rack and the wall in any out of
the way spot.
WINERACKSAMERICA.COM
360 North 700 West Suite F • North Salt Lake, UT 84054
(toll free) 888-373-6057
(fax) 801-936-0534
Once again, thank you for your business. Remember, customer
service is available to answer any questions Monday-Friday
7:00 am - 5:00 pm MST. Please feel free to contact us for any
wine storage needs.
4
ATTACH SOLID TOP
5. If you purchased a Solid Top with your rack, secure it by adding wood glue to the tops of each vertical riser.
Clamp the top to the frame using standard wood clamps until fully dry. (figure 4)
For extra support, use a nail gun to tack a nail through the top of the risers into the solid top support pieces.
(figure 5)
We would love to see your wine racks in use! Please feel free to
send any photos of your racks to [email protected]
5
SECURE WITH
FINISH NAILS
Solid Top
Support Piece
