Wine Guardian Pro DP200, Инструкция по установке, эксплуатации и обслуживанию

Страница: 41 / 58

41
General Duct Recommendation
✓
Support the flexible duct often to prevent sags or bends.
✓
Stretch the duct to make for a smoother interior with less air resistance.
✓
For a 90-degree bend, insert a metal elbow inside the flexible duct to avoid crimping.
✓
Do not squeeze or reduce the inside diameter of the ducts. This restricts the
airflow.
✓
Use short and straight ductwork.
✓
Review the configuration schematic on the Overview Sketch on page 12 for
information about which panels are available for duct connections and service.
✓
Remove the panels or grilles from the openings to connect the ductwork.
✓
Check that all the fan blades move freely.
✓
Check for loose foreign objects in any of the air paths.
✓
Connect the round flexible ducts to the Wine Guardian PRO using the duct collars that are
provided with the duct accessory kit.
✓
Pull the outer plastic wrapping and insulation away from the end of the duct to
expose the reinforced inside duct liner.
✓
Use tie straps or clamps around the inside liner to fasten the duct collar.
Do not clamp around the outside insulation. It compresses and loosens over time.
✓
Secure the duct collar to the unit using the screws provided. Be careful not to damage or
bend the gasket.
Using Ductwork
Cold Air to/from cellar or room
✓
Connect the supply air ductwork from the cellar to the supply air duct collar at the
Wine Guardian PRO unit.
✓
Connect the return air ductwork from the cellar to the return air duct collar at the
Wine Guardian PRO unit.
Warm Air to/from Condenser
✓
Connect ductwork on the condenser to direct heat and the air noise away from occupants.
✓
Connect ductwork to another space near the room or to the outdoors if the heat being
exhausted is undesirable.