Wine Guardian D025, Инструкция по установке, эксплуатации и обслуживанию

Страница: 79 / 96

73
CAUTION
Rick of personal injury.
Starting-up and Operating the Wine Guardian
启动
和操作酒卫
Now that the installation is complete, it’s time to start the unit up. Check to make sure all ductwork
and electrical connections are secure.
安装完成后，就该启动测试了。检查以确保所有管道和电气连接牢固。
Replace all panels which were removed during installation. Check that all of the openings in the unit
are covered with a blank panel, a ductwork connection or a grille.
放回所有在安装过程中的去掉的面板。检查确认主机的所有开口都有空白面板，管道连接或
格栅覆盖。
危险警告
Cover all openings of the unit to prevent a hand or finger from access inside the unit.
覆盖主机的所有开口，以防止手或手指伸到设备内部
Turn on the Unit
开动主机
Plug in the unit. Turn-on the rocker switch on the side of the unit. The rocker switch lights up to
indicate power to the unit. The unit may not come on right away due to the timer built into the
circuiting to prevent short-cycling.
插入电源。开启机器侧面摇杆开关。摇杆开关灯亮，表示电源接通。机器可能不会马上启
动，内置定时器以防短路循环。
Testing the Fan
测试风扇
（配置设置
7
）
自动风扇运行意味着只有当温控器要求制冷，制热，或选购的湿度调节器是加湿要求。
Factory default is AUTO FAN operation. You change into setting 7 to change from “AUTO” to
“ON.
出厂默认值为自动风扇操作。你可以改变设置
7
从自动更改为“开”模式。
⚫
ON means the fan runs continuously and indicates that the power is on and the
control circuit is energized and operating.
⚫
•ON
表示风扇持续地运行，表明该电源开启和控制电路通电正常工作。
⚫
AUTO means the fan runs only when the thermostat is calling for cooling, heating,
or the optional humidistat is calling for humidification.
⚫ •
自动风扇运行意味着温控器可以满足制冷，制热，或加湿的要求。