12
Setting the Temperature Control
NOTE: The temperature readout shows the actual cellar temperature, it will
temporarily show the set temperature while making adjustments, then reverts
back to the actual temperature after 5 seconds.
1.
Make sure power cord is connected to a properly grounded outlet.
2.
Turn power ON using the power button
3.
The temperature setting range is 54°F
–
72°F for the upper wine zone
and 32°F
–
50°F for the lower beverage zone
4.
Select the desired zone by pressing both the up and down arrow together
5.
Press the SET button to enter the temp setting mode. The set temp will
flash.
6.
Set the desired temperature by pushing the Temp UP or DOWN button.
7.
Temperatures increase or decrease 1°F with each push of the UP or
DOWN button. After 5 seconds the set temp will stop flashing and the
display will show the actual temp
8.
C/F: Press and hold both the power button and the set button together to
change between °C or °F temperature readout
9.
Manual defrost: Press the Up Arrow button for 6 seconds to start or stop
defrost.
Interior Light
•
For convenience, LED lighting has been built into the wine cellar upper zone.
Simply push the Light button (Down Arrow) once to turn ON and once to turn OFF.
For maximum energy efficiency, leave light off when not viewing your collection.
NOTE:
Temperatures may fluctuate depending on whether the interior light is ON
or OFF and depending on the position of the bottles.
Содержание 236 02 80 02
Страница 4: ...4...