Pro STAR Industries
1590-A N. Harvey Mitchell PKWY
Bryan, TX 44503
979-779-9399 1-800-262-7104
WAVE Instructions page 6
HOW IT OPERATES
HOW IT OPERATES
This machine is a portable, easy to use wide area vacuum
designed for use indoors, in a commercial or light industrial
environment.
When operating as a carpet vacuum, soil is lifted from the
carpet surface by a rotating brush and carried into a remov-
able bag by the vacuum motors.
1. Large debris such as paper cups, plates, etc.,
should be picked up before starting the cleaning
process.
2. Plan your cleaning route to work away from the
electrical source. Move machine forward at a steady
pace.
CLEANING
1. Adjust handle to comfortable position at waist level
or higher.
2. Use your finger to depress the Vacuum switch at
the base of the handle to activate the vacuum.
3. To adjust brush height, move the Brush Adjustment
lever on the right side to the correct setting for the
carpet being vacuumed. Lower brush gradually until
firm brush contact is heard.
WARNING
KEEP MACHINE MOVING WHILE BRUSH ENGAGED.
DAMAGE TO CARPET COULD OCCUR IF NOT MOVING.
NOTE: Always return brush to storage position after using
machine.
4. Depress the brush lever at the handle to start the
brush.
5. Move forward at a steady pace for through cleaning.
Run machine more slowly over extremely soiled areas.
6. Use the right side of the machine for edge cleaning.
7. To use the accessory wand and detail tools,
depress the foot lever in the back of the machine.
8. To keep the vacuum operating at maximum
efficiency, check the dust bag regularly. Empty when
1/2 to 3/4 full. Always use with disposable paper bag
for best results.
9. When finished vacuuming, coil the cable by hand by
looping into about a 3 foot diameter, Hang coiled cable
over handle. Wrap the end around the cable loop to
secure.
10.
Return brush to storage position.
