background image

Pro STAR Industries 

1590-A N. Harvey Mitchell PKWY 

Bryan, TX 44503 

979-779-9399   1-800-262-7104

 

WAVE Instructions page 3 

   

  

WARNING 

1.  To avoid electric shock use indoors only. 

 

2.  To reduce risk of fire, do not use volatile substances. 

 

INSPECTION 

Carefully unpack and inspect your wide area vacuum for 
shipping damage. Each unit is operated and thoroughly 
inspected before shipping, and any damage is the 
responsibility of the carrier, who should be notified 
immediately. 

 

ELECTRICAL 

The WAVE operates on a standard 15-amp 115 volt AC 
circuit. This is the typical wall receptacle found in 
household and light industrial environments. Voltages 
below 105 volts or above 125 volts could cause serious 
damage to motors. *Special voltage models available. A 
wiring diagram is mounted inside the rear control panel of 
machine. A copy of the wiring diagram is included in this 
Owner’s Guide. 

 

GROUNDING INSTRUCTIONS:  

This appliance must be grounded. If it should malfunction 
or break down, grounding provides a path of least 
resistance for electric current to reduce the risk of electric 
shock. This appliance is equipped with a cord having an 
equipment-grounding conductor and grounding plug. The 
plug must be inserted into an appropriate outlet that is 
properly installed and grounded in accordance with all 
local codes and ordinances. 

 

This appliance is for use on a nominal 120-volt circuit, and 
has a grounded plug that looks like the plug in Fig. A. A 
temporary adaptor that looks like the adaptor in Fig. B may 
be used to connect this plug to a 2-pole receptacle as 
shown in Fig. B, if a properly grounded outlet is not 
available. The temporary adaptor should be used only until 
a properly grounded outlet can be installed by a qualified 
electrician. 
The green colored rigid ear, lug, or the like extending from 
the adaptor must be connected to a permanent ground 
such as a properly grounded outlet box cover. Whenever 
the adaptor is used, it must be held in place by a metal 
screw. 

 

 

Grounding Information

 

 

 

NOTE:

In Canada, the use of a temporary adaptor is not permitted by 

the Canadian Electrical Code. 
NOTE: Au Canada, I’utiisation d’un adaptateur temporaire n’est pas 
autorisee par le Code canadien de l’electricite. 
 

EXTENSION CORDS: 

This wide area vacuum is designed to operate on a 
standard 15 amp 115 volt, 60hz, AC household current. 
Check the voltage shown on the serial number plate is 
suitable for the supply available. Voltages below 105 volts 
or above 125 volts could cause damage to the motors. 

 

If an extension cord is used, the wire size must be at least 
one size larger than the power cord on the machine: The 
WAVE is equipped with a 75 ft. 14/3 power cord. 

 

 
 

   
     WARNING 

Improper connection of the equipment-

grounding conductor can result in a risk of 

electric shock. Check with a qualified 

electrician or service person if you are in doubt 

as to whether the outlet is properly grounded. 

Do not modify the plug provided with the 

appliance - If it will not fit the outlet; have a 

proper outlet installed by a qualified electrician.

 

 

 

 

Содержание wave










Отзывы: