Windsor 1.022-322.0 Скачать руководство пользователя страница 13

SAFETY 

86343970 18HP LIGHTNING BURNISHER 

1-8 

 

Work Place/Industry Guidelines For CO Exposure Limits 

 
Limits for permissible exposure to CO vary substantially from region to region. City, State, and Industry 
requirements should be consulted prior to use of any equipment. The current Occupational Safety and Health 
Administration (OSHA) Permissible Exposure Limit (PEL) for CO is 50 ppm, as an 8-hour time weighted average 
(TW A). This is computed by making measurements at intervals over 8 hours, then adding the sums of the 
concentrations and the intervals, and dividing by 8 hours. For example: 
 
 
 
Time 

 

  Interval 

 

 PPM 

8:00-9:00 

 1 

HR 

 100 

9:00-10:00 

 1 

HR 

 25 

10:00-11:00 

 1 

HR 

 25 

11:00-12:00 

 1 

HR 

 50 

12:00-1:00 

 

1 HR 

 

50 

400ppm / 8HR=50pprn TW A 

1:00-2:00 

 1 

HR 

 50 

2:00-3:00 

 1 

HR 

 50 

3:00-4:00 

 1 

HR 

 50 

Time intervals =  

8 HR 

pprn =  400 

 
 
The current National Institute for Occupational Health and Safety (NIOSH) has determined that concentrations 
above the (IDLH) recommended level for CO of 1,200 ppm is immediately dangerous to life and health. NIOSH 
defines the IDLH exposure level as the concentration that could result in irreversible health effects or death, or 
prevent escape. from the contaminated environment within 30 minutes. 
 

Definition Of CO Effects 

 
The toxic effects of carbon monoxide in the blood are the result of tissue hypoxia (lack of oxygen) carbon 
monoxide combines with hemoglobin to form carboxyhemoglobin. Since CO and oxygen react with the same 
group in the hemoglobin molecule, carboxyhemoglobin is incapable of carrying Oxygen. The affinity of 
hemoglobin for CO is 200 to 240 times greater than for oxygen. The extent of saturation of hemoglobin with CO 
depends on the concentration of the gas, the quantity of inspired air and on the time of exposure. The severity 
depends on the state of activity of the individual and his tissue oxygen needs. 
 
According to Harrison's Principles of Internal Medicine 7th edition, no symptoms will develop at a concentration of 
0.01 % CO (100ppm) in inspired air, since this will not raise blood saturation above 10 %. Exposure to 0.05% 
(500ppm) for 1 hour during light activity will produce a blood concentration of 20% carboxyhemoglobin and result 
in a mild or throbbing headache. Greater activity or longer exposure causes a blood saturation of 30 to 50 %. At 
this point head ache, irritability, confusion, dizziness, visual disturbance, nausea, vomiting, and fainting can be 
experienced. Exposure for one hour to concentrations of 0.1 % (1000ppm) in inspired air the blood will contain 50 
to 80% carboxyhemoglobin which results in coma, convulsions, respiratory failure and death. On inhalation of 
high concentrations of CO, saturation of the blood proceeds so rapidly that unconsciousness may occur suddenly 
without warning. 

 
 
 

Содержание 1.022-322.0





























Отзывы: