The “Clean boiler and burner” cleaning request is displayed
Display on InfoWINplus IN 590 or FE 390
The VarioWIN is equipped with a cleaning interval display. The cleaning request for the combustion chamber and
burner pot is displayed on the InfoWIN and must be reset after cleaning has finished.
Cleaning:
a) Take out the baffle plate and remove the ash (VarioWIN 120 only).
b) Clean fly ash off the thermocontrol sensor with a cleaning brush.
c) Fallrinne reinigen.
d) Clean the burner pot.
e) Empty the ash pan(s) or remove the ash from the heating surface duct
f) Check that there is not too much dust in the VarioWIN reserve supply container and that there is no bridge
formation – remove the dust.
Cleaning the baffle plate
Thermocontrol sensor down chute Thermocontrol sensor
Subject
to
technical
modifications.
AWP-vor-übersetzt
aus
023824/03
Removing ash
VarioWIN Premium approx. every 400 kg pellets or VarioWIN Exklusiv-S / Exklusiv approx. every 1200 kg pellet
a) Insert the key for manual heating surface cleaning (VarioWIN Premium only) and move it back and forth se-
veral times.
b) Empty both ash pans.
Connect the key and operate it several times
Emptying the ash pan
Ash pan for
heating surfaces
Ash pan for
combustion chamber
VarioWIN 120
VarioWIN 120
VarioWIN 060
VarioWIN 060
VarioWIN 120
1 ........... Cleaning tool and, for VarioWIN 120, removal device for cone
2 ........... Guide groove for locking the cone in the burner pot
3 ........... Cone
4 ........... Primary air pin
5 ........... Grate plate
6 ........... Secondary air holes
7 ........... Lock for cone
8 ........... Burner pot
Cleaning the thermocontrol sensor and down chute
Resetting the cleaning request
After the combustion chamber and burner pot have been cleaned, the operating hours counter for boiler cleaning
must be reset.
Boiler cleaning
Time
Feed operating mode
Time profile feed
Probe switching
Choose
Back
Selecting “Boiler cleaning”
Has boiler and burner cleaning
been performed?
Confirm
Yes
Back
Confirming with the Yes button
At least once per heating season
see operating manual.
Press the Reset button or switch on the boiler at
the InfoWINplus. Wait for the self-test to finish,
press the Menu button and change to operator le-
vel. Select the „Boiler cleaning“ sub-menu in the
operator level and confirm by pressing Yes. The
counter is reset.