Begin installation
Tools Required: Phillips screw driver; slotted screw driver; pliers; wire cutters; electrical tape.
MOUNTING OPTIONS
If there isn't an existing outlet box, then read the following instructions. Shut the power off at the circuit
breaker or fuse box.
Secure the outlet box directly to the building structure. Use appropriate fasteners and building materials.
Only use a U.L. Listed metal outlet box marked "Acceptable for ceiling fan support" to install the ceiling fan.
Do not use a plastic outlet box or other device.
Figures 1,2 and 3 are examples of different ways to mount the outlet box.
Note: Please contact with dealer or Wind River at
855-817-WIND (9463)
if you need a longer downrod to
maintain proper blade clearance when installing on a steep, sloped ceiling.
To hang your fan where there is an existing fixture but no ceiling joist, you may need to install a hanger bar
as shown in Fig. 4.
Package contents
Unpack your fan and check the contents. See page 2. You should have the following items:
1. Downrod assembly (1) 7. Light kit plate (1)
2. Mounting bracket (1) 8. 17W LED assembly (1)
3. Canopy (1) 9. Glass shade (1)
4. Canopy cover (1) 10. Blade (5)
5. Coupling cover (1) 11. Blade bracker (5)
6. Fan motor assembly (1) 12. Tran2 mounting A23 12V battey(1)
13. Loose parts bag containing
A: Machine screw (2) B: Wood screw (2) C: Metal washer (2) D: Lock washer (2) E: Blade screw (16)
F: Fiber washer (16) G: Blade bracker screw (11) H: Wire nuts (3) J: Safety bolt (1) K: Nut (1)
L: Balancing kit (1)
Safety tips
1. To reduce the risk of electric shock, ensure electricity has been turned off at the circuit breaker or fuse
box before beginning.
2. All wiring must be in accordance with the National Electrical Code “ANSI/NFPA 70-1999” and local
electrical codes. Electrical installation should be performed by a qualified licensed electrician.
3. The outlet box and support structure must be securely mounted and capable of reliably supporting a
minimum of 35 lbs. Use only UL Listed outlet boxes marked “FOR FAN SUPPORT.”
4. The fan must be mounted with a minimum of 7 ft. clearance from the trailing edge of the blades to the
floor.
5. After making electrical connections, spliced conductors should be turned upward and pushed carefully up
into the outlet box. The wires should be spread apart with the grounded conductor and the
equipment-grounding conductor on one side of the outlet box and ungrounded conductor on the other side
of the outlet box.
6. All setscrews must be checked and retightened where necessary before installation.
WARNING:
To reduce the risk of electrical shock or fire, do not use this fan with any solid-state fan
speed control device. Please contact with dealer or Wind River at
855-817-WIND (9463)
if using
solid-state remote.
WARNING:
To reduce the risk of fire, electric shock, or personal injury, mount the fan to the outlet
box marked acceptable for fan support with the screws provided with the outlet box.
1