Wind Crest PFA36SCG, Инструкция по использованию, уходу и установке

Страница: 17 / 60

Filter Clean Reminder:
When flashes on display, the metal filters installed are
required to be cleaned. This will occur after every 30 hours of
use.
Re-setting Function:
Reset the FIlter Clean Reminder timer when filters are cleaned
and re-installed. Press and hold for approximately 5
seconds until on display disappears . The Filter
Clean Reminder function is now re-set and a new 30 hours
elapse cycle is initiated.
Set Mode
Clean Filters
To Reset
hold 5 secs.
display from <A> to <-->
display <A>
flashes
CONTROLS: FILTER CHANGE INDICATOR (Metal Filters)
FIlter Clean Reminder (Standard Metal Filters fitted):
Whether your hood is installed as an Exhaust or Purifying unit, a set of metal fIlters are fitted by the factory. Theese Metal
Filters are intended to filter out residue from cooking. It need not be replaced on a regular basis but are required to be
kept clean. The Filter Clean Reminder function in the microprocessor will automatically indicate by a flashing when
the metal filters are needed to be cleaned after every 30 hrs. of use.
Filters can be cleaned by hand or in a dishwasher with non- abrasive soap. Heavily soiled filters should also be soaked
in grease cutting detergent such as '409' or its equivalent, prior to cleaning.
Description of the Hood & Controls
16