Wind Crest PFA36SCG, Инструкция по использованию, уходу и установке

Страница: 16 / 60

CONTROLS: FILTER CHANGE INDICATOR (Carbon Filters)
FIlter Change Reminder (Carbon, if fitted):
When your hood is installed as a 'Purifying' (Ductless Recirculating) unit, it is fitted with a set of Carbon FIlters to purify
exhaust and fumes from cooking, and re-circulates the air witihin the home. Theese Carbon Filters are required to be
replaced after every 120 hours of use. The Filter Change Reminder function in the microprocessor needs to be switched
on. The microprocessor in the controls when set, will elapsed and count usage time and indicate by a flashing when
carbon filter replacement is needed every 120 hrs.
Setting the Filter Change Reminder:
When Off, hold for approx. 5 seconds.
The display will change from (exhaust mode) to ,
(purifying mode/carbon filters used) this indicates that the
elapse timer function is switched on and Carbon Filters are
used.
Filter Replace Indicator:
When the diplay starts flashing, the Carbon Filters
requires replacement after 120 hours of use.
Re-setting Function:
Once filters are replaced, with hood off, press and hold ,
the display will appear; hold for approximatly 5 seconds
until on display disappears . The Filter Change
Reminder is now re-set and a new 120 hours elapse cycle
is initiated.
Set Mode
Change Filters
To Reset
hold 5 secs. display from <--> to <C>
hold 5 secs.
display from <C> to <-->
display <C> flashes
Description of the Hood & Controls
15
www.windcrestcnp.com