TH210-3 for MF
_____________________________________________________________________
_________________________________________________________
3
Do not allow the printer to start printing when there is no
recording paper installed, otherwise the print head and platen
roller will be damaged.
To ensure quality print and normal lifetime, use recommended
or good quality paper.
Shut down the printer when connecting or disconnecting
interfaces connectors to avoid damage to the control board.
Set the print darkness to a lower grade as long as the print
quality is acceptable. This will help to keep the print head
durable.
The printer should only be disassembled or repaired by a
technician, who is certified by Wincor Nixdorf. At any work on
the device and plugging/unplugging cables disconnect the
device from the power supply completely. Switch off the device
and pull the mains plug.
Operate the printer only with power supplies and cables
approved by Wincor Nixdorf
Keep this manual safe and at hand for ready reference.
Содержание TH210-3
Страница 1: ...TH210 3 for MF Thermal Printer User Guide ...
Страница 3: ...Published by Wincor Nixdorf International GmbH D 33094 Paderborn ...
Страница 4: ...TH210 3 Thermal Printer User Guide Edition March 2010 for MF ...
Страница 7: ...Paper Specifications 23 Print Zones 24 Print Zones for 80 mm Paper 24 List of Commands 25 ...