Wincor Nixdorf TH200E Скачать руководство пользователя страница 9

Страница: 9 / 23

TH200E User Guide

Connecting Cables

The cables must be connected before plugging in the power cable. Turn off the host
computer, if necessary.

Plug in the communication cable. Secure the cable by tightening the two screws
(for serial interface).

Plug in the cash drawer cable. The connector allows connection for one or two
cash drawers. (use a “Y” cord for two drawers).

Finally plug in the 24V power cable for the printer.

Note:

When using an external power adapter, connect the adapter to an appropriate
grounding outlet. Do not connect the Hosiden plug when the host computer is
turned on, this can lead to an automatic reboot of the system.

If the power supply current can only provide 2A or less, use the configuration menu
to select LOW POWER MODE.

Depending on the interface the connector panel may vary from the below
illustration.

Communication

Connector

Cash Drawer

Connector

Power Supply

Connector

(Hosiden Plug)

Back View

Содержание TH200E
























Результаты поиска

Содержание TH200E

Отзывы:

Похожие инструкции для TH200E

Бренды по названию

Популярные бренды

Wincor Nixdorf TH200E, Руководство пользователя

Результаты поиска

Содержание TH200E

Отзывы:

Похожие инструкции для TH200E

Бренды по названию

Популярные бренды