TH200E User Guide
12
Configuration Menu Settings
Configuration Menu
Below settings are available in the configuration menu. Use this menu to
enable/disable certain functions and to configure the printer.
Use the FEED button to navigate to the respective sub-menu.
Communication
(Serial)
Baud Rate
Parity
Data Bits
Stop Bits
Handshaking
Rx Buff Size
Data Receive Error Setting
Mechanism and Hardware
Mark Sensor (specific models only)
Cutter
Buzzer
Power Supply
Print Setting
Darkness Settings
Paper Roll Width
Left Margin
Right Margin
CR Command
Code Page
Paper Sensor Settings
PAPER LOW Alarm
Stop Print when PAPER LOW
Set Default Configuration
Set printer to default configurations
To save your new settings, select
Exit with Save
on the configuration main menu. Use
Self-Test printout to verify your new settings.
Note:
contents of the submenu might change depending on firmware version.
