manualshive.com logo in svg

Wincor Nixdorf BEETLE S-II, Руководство пользователя

Поделиться
Скачать
Wincor Nixdorf BEETLE S-II Скачать руководство пользователя страница 24

Mo du lar  prin ters 

The standard parallel interface LPT1 is intended for connecting a printer.

Appropriate POS printers can also be connected via the low-voltage jack
24V, max. 3A at the external power supply. A connecting cable with a
HOSIDEN (EPSON compatible) plug is required for this.

Do not connect the HOSIDEN plug when the system is turned on, this can
lead to an automatic reboot of the system.

Connect only cable to the 24V connector which are marked with DP-1 or
DP-2.

Cash dra wer

The BEETLE /S-II has a RJ12 sockets at the power supply for connecting
cash drawers. Make sure that the connector is plugged firmly into the socket 
to prevent malfunctioning. RJ12 plugs lock in when you insert them. Power
is supplied to the cash drawer via this socket, P24V +5% / -10%.

Connecting daisy chained cash drawers and 12V OEM-drawers is
prohibited!

The RJ12 socket is only for cash drawer.

CONNECTING PERIPHERALS

20

Содержание BEETLE S-II





















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды