CRT
You can connect a monitor to the BEETLE /M-II plus via the 15-pin D-sub
jack on the CRT adapter. Power is supplied to the monitor via the AC-outlet
on the BEETLE /M-II plus, located on the back of the housing.
A LCD screen can be connected alternatively if a TFT adapter is installed.
PLINK TFT (TFT- VGA Mo ni tor)
If a TFT adapter is installed you can connect a Panellink-TFT to the
BEETLE /M-II plus. Connect the 40-pin data cable of the LCD to the system.
The signals for the touch screen function and the power supply is also made
via this cable. To implement the touch screen functionality for the COM1* or
COM2* interface you have to change some system settings in the BIOS
setup.
The COM1* or COM2* interface is without effect if the onboard TFT adapter
with touch screen function is installed. In this case the interface is not
available for other peripherals.
24
BEETLE /S-II plus
