BEETLE/iScale TOP
_____________________________________________________________________
_____________________________________________________________________
10
Interfaces:
-
Power input +5V, +12V
4pin hard disk connection
-
COM1 RS232
9pin DSUB connector
-
COM2 current loop
15pin DSUB connector
-
Test connector
2x7 pin
-
Internal LCD interface
to VGA/4 MUX Controller
26pin Zif connector
-
Calibration switch with plastic protecting ring and calibration seal
Power Consumption:
-
P5v (VCC):
300mA
-
P12V
(Scale interface current loop)
50mA
-
P12V (incl. scale)
200mA
Manufacturer Certification
This device fulfills the requirements of EU Regulations 89/336/EEC
"Electromagnetic Compatibility Directive" and 73/23/EEC "Low Voltage
Directive".
The device carries the CE logo on its rear side, or the logo is located on
the packaging.
