Wincor Nixdorf BEETLE /iPOS plus Advanced, Руководство пользователя, Страница: 12 / 73

4 BEETLE /iPOS plus Advanced User Manual
Safety Notes
The BEETLE /iPOS plus Advanced conforms to the current safety standards
for data processing equipment.

If this device is taken from a cold environment into the operating
room, moisture condensation may form. The device must be
absolutely dry
before being put into service; an acclimatization
period of at least two hours must therefore be observed.

This device is equipped with a safety-tested power cable and may be
connected only to a prescribed grounded-contact power socket.

When setting up the device, ensure that the power socket on the
device and the grounded-contact power socket are easily accessible.

Whenever work of any kind is done on the device, as well as when
data cables are plugged and/or unplugged, the device must be com-
pletely disconnected from the line voltage. To do so, turn the device
off and unplug the power cord.

To disconnect the device from the supply voltage completely, switch
off the device and disconnect the power plug of the system.

Never plug in or unplug data communication lines during thunder-
storms.

Protect devices from vibrations, dust, moisture and heat.

Always dispose of used parts, such as batteries, in an environmentally
safe manner.

In emergencies (e.g. damaged housing or damaged power cable,
penetration by liquids or foreign bodies), the device must be switched
off
immediately, the power plug disconnected and the Customer
Service of Wincor Nixdorf or your dealer must be notified.

Your BEETLE system is the result of modern technical innovation. So
please see for according structural and technical surroundings to
guar-
antee a faultless and efficient work of your BEETLE. Therefore, you
should connect your BEETLE or other IT-devices only to power supply
systems with separately guided protective earth conductor (PE). This
kind of electricity system is known as TN-S network. Do not use PEN
conductors!