Wincor Nixdorf BA63G, Руководство по эксплуатации продукта

Страница: 22 / 37

Customer display control
GB - 17
L
OAD USER DEFINED FONT
The following command carries a user defined character font that to be stored in the
internal buffer:
Code Hexadecimal
ESC ‘[‘ ‘F’ code1 code2 1B 5B 46
Only 16
×
16 resolution for 2-bytes code character and 8
×
16 resolution for 1-byte code
character are supported. User can define up to 400 character fonts.
For 2-byte code character, code1 and code2 specify character code, code1 must be
greater than 7Fh. 32 bytes font data must follow immediately after the ESC sequence.
For 1-byte code character,
code1 is 0 and code2 is the character code, 16 bytes font
data must also follow immediately after the ESC sequence.
User can redefine the font of internal standard character font or define new characters
set.
U
NDEFINED USER FONT
The following command removes user defined character:
Code Hexadecimal
ESC ‘[‘ ‘U’ code1 code2 1B 5B 55
S
ETTING CLOCK
Use this command to adjust the time of the internal clock:
Code Hexadecimal
ESC ‘[‘ ‘hh’ ; ‘mm’ ‘T’ 1B 5B 31 30 3B 30 30 54
There is a real time clock in the device. Use this command to initialize the clock.
Parameter hh and mm are one or two ASCII decimal number, which represent the hour
and minute respectively. Once the command is executed, the clock will keep the time
until the next Set Clock command or system power down. One execution of this
command, the screen will display current time which is updated every one minute. Also
displayed is a picture of the WN BEETLE with a pair of eyes that move every one
second. This will continue until any command or character is send to the display.