WINCODE LP423N, Руководство пользователя

Страница: 64 / 68

LP4 USER MANUAL
- 63 -
6. LED indicators and button explanation
LP423N/LP433N model equips six functional LED indicators (blue color) and a feed
button (white and red LED color), user can understand the current printer status
easily according to the LED display status. The description of each LED display status
is listed as follows.
LED Display status Possible problem Solution
LED 1
LABEL
Always on:
Label out
The label placement is
not correct or labels
been run out.
Open the cover, and confirm
the label placement and if the
label has been run out. Then
close cover and press the Feed
button.
Flash ： Gap out Sensor cannot detect
the gap of label.
Run the auto calibration on
the Pinter Utility to adjust the
sensitivity of sensor.
LED 2
CUTTER
Always on ：
Cutter module is
not ready
Cutter installation is
not correct
Re-install the cutter module
and check the cutter
connector connection.
Flash ： Paper jam 1) Check if the label
thickness is exceeded
the spec of cutter
module.
Place label in the correct
position and press button to
start printing.
LED 1
LED 3
LED 2
LED 4
LED 5
LED 6
Feed
Button