Winco TransMotion TMM4 PLUS, Руководство по эксплуатации, Страница: 3 / 31

Document No.: TMM-2217-13
Revision: A
Page 3 of 30
IMPORTANT NOTES ABOUT THIS MANUAL
This Operations Manual is designed to assist you with operating your TransMotion by Winco Product. Carefully
read this manual before using the equipment or doing service / maintenance on it. If you are unable to understand
the WARNINGS and CAUTIONS and instructions, contact TransMotion by Winco customer service before
attempting to operate or service the equipment. Otherwise, injury or damage may result.
To assure safe operation of this device, it is essential that methods and procedures be established for educating
and training staff on the safe and effective operation of this product.
TransMotion by Winco reserves the right to change specifications without notice.
The information contained in this document is subject to change without notice.
Specifications listed are nominal, and operation may vary slightly from unit to unit due to tolerance variations or
power supply variations.
Photographs and illustrations contained within this document may not depict exactly the model you have. This
document is intended to cover many closely related models.
INTENDED USE STATEMENT
TMM PLUS Stretcher-Chairs are intended for use in patient treatment, transport and/or recovery within a hospital,
clinic, same-day/ambulatory surgery center, or similar environment.
The pendant control is NOT INTENDED FOR PATIENT USE.
A surgeon and/or clinician must always rely on his or her own clinical knowledge when deciding whether to use a
TMM PLUS Stretcher-Chair when treating a patient.
TRANSPORTATION, STORAGE, HANDLING & DISPOSAL
The product should be transported in factory packaging, inside an appropriate medium for the destination, i.e.,
air/sea cargo containers.
The product should be stored in an environment that will inhibit rust/mold formation.
Winco Mfg., LLC recommends not leaving the product in the factory packing in excess of three (3) months.
The product should always be handled in a manner consistent with the user instructions and in a manner to prevent
contamination after each use.
The product has many recyclable components and to the extent practical, all effort should be used to recycle
responsibly. Otherwise the product components shall be disposed of in accordance with local statutes.