background image

TABLE OF CONTENTS

PRODUCT SAFETY

1

SPECIFICATIONS

2

PREPARATION

UNPACKING

2

OIL REQUIREMENTS

2

FUEL REQUIREMENTS

2

COOLANT REQUIREMENTS

3

BATTERY CONNECTIONS

3

OPERATIONS

FRONT PANEL DESCRIPTION

3

RECEPTACLE AND BREAKERS

5

FULL POWER CONNECTIONS

5

ENGINE CONTROL MODULE

5

VOLTAGE REGULATOR

6

SELECTING THE CORRECT

VOLTAGE

7

START-UP CHECKLIST

7

ELECTRIC STARTING

7

REMOTE STARTING

8

CONNECTING THE LOADS

8

UNIT STORAGE

9

50 CYCLE OPERATION

9

MAINTENANCE

9

PREVENTIVE  MAINTENANCE

9

WIRING DIAGRAMS

DC ELECTRICAL SCHEMATIC

10

RECEPTACLE PANEL

11

CIRCUIT BREAKER PANEL

11

CONTROL PANEL

12

CONTROL PANEL WIRING DETAIL

13

AC SCHEMATIC

14

AC WIRING DIAGRAM

15

WARRANTY

16

Read and understand all instructions in the manual
before starting and operating the generator set.

USING THIS MANUAL

Congratulations on your choice of a Winco generator set.
You have selected a high-quality, precision-engineered
generator set designed and tested to give you years of
satisfactory portable service.

To get the best performance from your new engine
generator set, it is important that you carefully read and
follow the operating instructions in this manual.

Should you experience a problem please follow the
“Things To Check” near the end of this manual. The
warranty listed in this manual describes what you can
expect from WINCO should you need service assistance
in the future.

PROPER USE AND INSTALLATION

You must be sure your new engine generator set is:
*

Properly serviced before starting

*

Operated in a well ventilated area

*

Exhaust gases are dispersed safely

*

Wired by a qualified electrician

*

Operated only for its designed purposes

*

Used only by operators who understand its operation

*

Properly maintained

COPY YOUR MODEL AND SERIAL NUMBER
BELOW FOR FUTURE REFERENCE.

No other WINCO generator has the same serial number
as yours.  It is important that you record the number and
other vital information here, if you should ever need to
contact us on this unit it will help us to respond to your
needs faster.

MODEL____________________________________

SERIAL  NUMBER____________________________

PURCHASE  DATE____________________________

DEALER___________________________________

Page i

Содержание MDS50R3/B



















Отзывы: