Winco Kattex FVS-1, Руководство пользователя

Страница: 11 / 12

11
Installation on the cutting board mount
1. Remove the mounting locking screw and slide out leg
from the mounting base.
2. Attach the mounting base to the cutting board
mount with the flat head screws and sleeve nuts
provided with the cutting board mount.
3. Attach the mounting leg to the fruit and vegetable
slicer with hex screws.
4. Slide the assembled fruit and vegetable slicer onto
the mounting base and secure with the mounting
locking screw.
5. Place the push plate inside fruit and vegetable slicer.
Slide the push rod through the “L” bracket hole and
through the spring and thread into the back of the
push plate.
WARNING: THE BLADES ARE VERY SHARP .
PLEASE USE CAUTION WHEN HANDLING.
Note: The locking pin should be in the 9 o’clock
position on the fruit and vegetable slicer.
CBM-1218