Winco 6240 Inverness 24 Hour Treatment Recliner Скачать руководство пользователя страница 24

5516 Southwest 1st Lane

Ocala, Florida 34474

1-800-237-3377/ 352-854-2929/ Fax: 352-854-9544

e-mail: [email protected]

www.wincomfg.com

#006335

 

REV D 12-04-15 DBM 

LIMITED WARRANTY

TERMS

Winco Mfg., LLC. warrants this product to be free of manufacturer’s defects in material and workmanship, provided that the product is used ac-
cording to normal operating conditions and proper maintenance intended by manufacturer.  This warranty is available only to the original retail 
purchaser, is non-transferable and commences on the date of retail sale; proof of purchase required.

 LIMITED ONE YEAR COMPLETE PRODUCT WARRANTY: Winco Mfg., LLC warrants the complete product for one (1) year. 
 

 

 

At Winco Mfg., LLC. sole discretion, it may repair or replace any components freight free that are

 

 

 

found to be defective during the fi rst year. Winco Mfg., LLC. shall not be liable for any labor, or any   

 

 

 

other costs incurred as a result of or in conjunction with a warranty claim. 

LIMITED THREE YEAR WARRANTY: Winco Mfg., LLC warrants recliner mechanisms, electrical components, vinyl panels and  
 

 

 

Vinyl on upholstered parts [from cracking or delaminating] pressurized gas springs, and casters, when  

 

 

 

new, for a period of three (3) years. At Winco Mfg., LLC.’s Sole discretion, it may repair or replace    

 

 

 

components found to be defective.  Winco Mfg., LLC. shall not be liable for any labor, shipping or any  

 

 

 

other costs incurred as a result of or in conjunction with a warranty claim.

LIMITED LIFETIME CHAIR FRAME WARRANTY: Winco Mfg., LLC warrants steel and aluminum base frames for all products,   
 

 

 

when new, for the lifetime of the original purchaser. This limited warranty does not apply to 

   paint/fi nish or any components attached to the frame such as; upholstery, foam, casters, mechanisms  
 

 

 

or related parts that are covered under above warranties. Winco Mfg., LLC shall not be liable for any  

 

 

 

labor, shipping or any other costs incurred as a result of or in conjunction with a warranty claim. 

The purchaser’s exclusive remedy under this warranty shall be limited to such repair or replacement of defective components 
at Winco Mfg., LLC sole discretion.  For warranty service, contact the dealer that the product was originally purchased from or 
Winco Mfg., LLC directly.

EXCLUSIONS

There are no other warranties, conditions, representations or guarantees, express or implied, made or intended by Winco Mfg., LLC and all other 
warranties, conditions, representations or guarantees including any warranties, conditions, representations or guarantees under any Sale of 
Good Act or Like legislation or statute is hereby expressly excluded.  Any and all other implied warranties shall not extend beyond the duration of 
the express warranty.  Liability for incidental or consequential damages is excluded to the extent permitted by law.  Some states do not allow the 
exclusion or limitation so the above limitation or exclusion may not apply to you. This warranty gives you specifi c legal rights.  In addition you may 
also have other rights, which vary from state to state.

GENERAL PROVISIONS

No warranty herein contained or set out shall apply when damage or repair is caused by any of the following:
1. 

Damage in transit.

2. 

Accident, alteration, abuse or misuse of product i.e. exceeding weight capacities, applying inordinate pressure to footrest/leg rest, use  

 

in Mental Health facilities like institutions or, any unintended use of the product or use in unintended environments 

 

(i.e. outdoor, showers, MRI rooms, etc..)

3. 

Fire, water damage, theft, war, riot, hostility, acts of God.

Examples contained in this list are not to be construed as all-inclusive. 

Design, appearance, parts, & construction are subject to change without notice. 

Содержание 6240 Inverness 24 Hour Treatment Recliner

























Отзывы: