Winco 6240 Inverness 24 Hour Treatment Recliner Скачать руководство пользователя страница 13

Copyright 2016, WINCO MFG., LLC

13

SIDE-TABLE OPERATION: 

(OPTIONAL FEATURE)

1.  TO RAISE TABLE: Grasp center of table and gently lift into place. 

Side-table will lock into place with an audible "click" once fully 
extended.

WARNING:

 

• 

DO NOT lean or sit on side tables.  

• 

DO NOT use table for support or assistance when exiting or 
entering the chair.

• 

Keep hands and objects clear of the moving parts of the table 
mechanism. 

IMPORTANT: 

• 

Side-tables have been rated for a MAXIMUM weight capacity of 
20 lbs. (9.0 kg)

2.  TO STORE: Lift up on the lever located under the side-table and 

lower to its stored position.

WARNING:

 

• 

Keep hands and objects clear of the moving parts of the table 
mechanism.

2

1

ATTENDANT OPERATING INSTRUCTIONS

PIVOT-TABLE OPERATION: 

(OPTIONAL FEATURE)

TO POSITION THE TABLE: 
1.  Loosen the adjustment knob (A) and swing away or place in the "lap" 

position. 

2.  Tighten adjustment knob (A) to secure position. 

WARNING:

 

• 

DO NOT lean or sit on pivot-tables.  

• 

DO NOT use table for support or assistance when exiting or entering 
the chair.

IMPORTANT: 

• 

Pivot-tables have been rated for a MAXIMUM weight capacity of 
20 lbs. (9.0 kg)

TO REMOVE THE TABLE:
3.  Loosen the adjustment knob (A) 2 full turns and lift up on pivot-table.

            

3

1

Содержание 6240 Inverness 24 Hour Treatment Recliner

























Отзывы: