Page 5 of 44
Document No.: 006344
Revision: J
OWNERS OPERATING & MAINTENANCE MANUAL
VERŌ CARE CLINER
Copyright © 2020 Winco Mfg., LLC
INTENDED USE STATEMENT
T
he Verō Care Cliner is a recliner for use in medical settings. It is designed to provide comfort for patients seated
for extended periods of time while receiving clinical treatments such as Dialysis or Infusion or during recovery from
surgical procedures where positional adjustments are beneficial. The recliner is also suitable for general use in
many medical settings such as, but not limited to, hospital room chair, waiting room chair, convalescent home chair,
etc.
TRANSPORTATION, STORAGE, HANDLING AND DISPOSAL
•
The product should be transported in factory packaging, inside an appropriate medium for the destination,
i.e. truck, air, or sea cargo containers.
•
The product should be stored in a dry environment that will inhibit rust or mold formation.
•
Winco Mfg., LLC recommends not leaving the product in the factory packaging in excess of three (3)
months.
•
The product should always be handled in a manner consistent with the user instructions and in a manner to
prevent contamination after each use.
•
The product has many recyclable components and to the extent practical, all effort should be used to
recycle responsibly. Otherwise, the product components shall be disposed of in accordance with local
statutes.
PREPARATION: BEFORE YOU BEGIN
1.
You should thoroughly read and possess a full understanding of this manual before using this product. It is
imperative that all users know how to properly operate all functions and features of this product, including,
but not limited to, footplate, casters, swing arms and side table operation and any accessories including Heat,
Heat & Massage, and Power Recline.
2.
Carefully examine your product for any damage. Be sure to inspect all components.
IF DAMAGE IS EVIDENT,
CONTACT FREIGHT CARRIER OR WINCO IMMEDIATELY.
3.
Remove all packaging material and any hardware that was secured for shipping. Save packaging (see #6
below)
4.
Carefully remove all components and any included tools and/or parts from the carton.
5.
You may need to cut packaging materials with a box cutter or scissors to access the product. Use
CAUTION
to avoid personal injury or damage to the product.
6.
Save all boxes and packaging material until
AFTER
you have assembled your product and have verified that
all components are functioning properly. These material are required if it becomes necessary to return the
product.
7.
Read all hangtags and labels carefully. Hangtags and labels contain pertinent information regarding your
product specifically. They may be located on the back of the chair, attached to the handles or chair back.
8.
DO NOT
install, maintain, or operate this equipment without reading and following this manual otherwise injury
and/or damage may result. In the event that someone improperly operates this product and causes damage
to it, the warranty may be voided.
IF YOU HAVE QUESTIONS OR CONCERNS PLEASE CONTACT WINCO
MFG., LLC
.
WINCO ASSUMES NO RESPONSIBILITY FOR DAMAGE OR INJURY CAUSED BY IMPROPER ASSEMBLY,
INSTALLATION, USE, MODIFICATION, OR IMPROPER MAINTENANCE OF THESE PRODUCTS.
