Pedestal feet are designed for chairs that are
intended to remain in a stationary position.
Use slide-out foot plate with qualified staff assistance only.
ONLY GAS-BACK and PRC
models equipped with a
FOOT PLATE
are suitable for occupant transport (5X08, 5X18,
5X48, 5X58, 6X08, 6X18, 6X48, 6X58, 5P, and 6P). No other models are suitable for
occupant transport.
Prior to transporting an occupant, ensure that the footplate is fully extended and the chair
is in a fully upright, locked position.
NEVER
transport an occupant with their feet hanging
down, without the footplate in place, as this may cause
serious injury.
Chairs with 3" casters OR without a footplate are NEVER
suitable for patient transport.
The foot plate for the Standard Verō is rated for a
MAXIMUM
weight capacity of 350 lbs (158.8 kg).
The foot plate for the XL Verō is rated for a
MAXIMUM
weight capacity of 500 lbs (226.8 kg).
1.
TO EXTEND
: Using your foot, pull out the foot plate as far as it will travel.
The foot plate can now be used by the occupant.
2.
TO STORE
: Using your foot, push in on the foot plate until it is returned to
the fully stored position.
•
The foot plate can be a tripping hazard if not returned to its stored
position after use.
•
ALWAYS
store the foot plate when not in use.
Page 16 of 44
Document No.: 006344
Revision: J
OWNERS OPERATING & MAINTENANCE MANUAL
VERŌ CARE CLINER
Copyright © 2020 Winco Mfg., LLC
FOOT PLATE OPERATION (OPTIONAL FEATURE)
CASTER OPERATION - CONTINUED
PEDESTAL FEET
1
2
NOTE
: The foot plate option is ONLY available for models with 5" casters.
