•
Feed the hook end of the wire rope from the drum through rollers to the front and
attach the clevis hook. Where the thimble eye is too big or if a fixed hook is used, you
may need to remove the top fairlead roller to allow the hook end to pass through.
•
With a synthetic rope with a spliced-on hook you may need to pull the rope off and
feed the rope back through the hawse fairlead from the drum end.
Connecting the Hydraulic Supply:
WARNING: the hydraulic supply must be fitted with a suitable regulator. Do not
exceed the rated pressure or flow for the winch.
•
The connection and set up of the hydraulic supply should only be undertaken by a
hydraulic engineer or suitably competent person.
•
The specification of the hydraulic supply is critical - it must not exceed the limitations
of pressure or flow as to do so could cause catastrophic failure of the winch.
•
Where the hydraulic pump can exceed the maximum working pressure of the winch
a suitable pressure regulator must be installed and calibrated to protect the winch
from over-pressure.
Fig 1. Basic Configuration Schematic
Содержание Hydraulic Winch
Страница 8: ...Parts diagram...
