OWNER’S MANUAL
PAGE 7
winchestersafes.com
PONY SERIES
DELIVERY AND INSTALLATION
A. If you purchased your safe from a retailer and are having it delivered and
installed,
the delivery company personnel will provide you with the proper instruction
for the correct operation of your safe . Pay very close attention to the operation of the lock .
Make sure you can comfortably operate the lock before they leave your home or office .
After they have shown you how to operate the lock, you should lock and unlock the safe
several times without any assistance from them . Once you are comfortable with this
procedure, and can do it consistently, you are now ready to operate your safe .
Your new safe left the factory in new condition and without damage . Inspect your new
safe for any damage prior to the delivery people leaving . Any damage claims at time of
delivery must be resolved with the delivery company and/or your retailer . Please do not
contact the factory .
B. If you purchased your safe and are doing your own delivery and installation,
you must read and follow these instructions . Safes are heavy and cumbersome and
there are risks associated with the untrained consumer doing their own delivery and
installation . We recommend that you use a professional safe installer, who is insured, and
will have the necessary equipment and training to safely and properly install your safe .
1.
Packaging should have been removed and safe inspected for damage prior to
accepting the safe from your retailer . If your safe is damaged at this point, please contact
your retailer . Do not contact the factory .
2
. Verify that the Serial Numbers on the safe are the same as the one in this manual .
Serial Numbers are located on top of the safe, in the back right corner and also on the
upper part of the inside door, near the locking bolts . In the unlikely event that all three
serial numbers do not match exactly, please contact the Winchester Safes Customer
Service Department .
